17 May 2018 Fairfield Primary Gate System Blog Advanced, Fairfield, gate, It, motorised, primary, school, Services, Support, system Joe Walcehster Last month we were approached to motorize Fairfield Primary Gate System, one of the schools on our support contract. The Fairfield Primary Gate System would need to work both independently and as a pair depending on the command given. This was a unique issue for a school as each school usually have separate pedestrian and Vehicle gates but Fairfields use the same set. Unique Gate Access Solution The system designed was a Paxton Net 2 and BFT combination. The BFT gate controller. The use of Paxton Net 2 allowed the school to join the George spencer Central access control server allowing full roaming of staff across all trust schools. To allow multiple access options we used Paxton net 2 entry panels mounted on custom made mounts, these panels allow multiple token types to be used as well as the use of the built in keypad for pin numbers and the use of SIP protocol to link to the schools existing VoIP network. The BFT gate controller has been configured to fire different commands depending on the relay triggered by Paxton, this allows the use of one or both gates either separately or individually. The gates have been fitted with break beam photocells and crush bars to eliminate any possible entrapment areas that could cause any harm or damage to pedestrians or vehicles. The Camera System that was put into place. Centralized CCTV System As well as the installation of gates, a camera system was installed to allow office staff to monitor access via the gate and give them a visual before allowing or denying access to the site.